With a few batteries, you can make a portable outdoor weather data capture system. You can also connect it to your host PC or ODROID via ODROID-SHOW to log the various environmental data like a weather station. Each sensor is shown in this picture
Put your weather board on the ODROID-SHOW and connect a micro-USB cable to your host PC or other ODROID Linux boards. If the connection is established, you can find /dev/ttyUSB0 or similar one. Connect 3~4 Alkaline or NiMH/NiCD batteries if you need a portable device.
Download the sketch file and libraries from this link. https://github.com/hardkernel/ODROID-SHOW/ Check the place of weather_board.ino sketch file. ODROID-SHOW/firmware/weather_board/weather_board.ino Select “preference” in the File menu and choose “ODROID-SHOW” of sketch folder. To add proper libraries, Select Import library -> Add library and “ODROID-SHOW/libraries. It’s time to build and upload the sketch file. The jumper(nearby reset button) must be installed. You will see this screen which shows various weather data.