(DISCONTINUED)USB3.0 to SATA Bridge Board Plus

Boost your ODROIDs to the next level of storage performance with SSD or HDD.
This board contains a USB3.0 to SATA3 controller (JMicron JMS578) allowing interfacing of a single 2.5″ SATA HDD/SDD. Archive over ~260MB/sec transfer speed with UAS capability.

USB3.0 to SATA Bridge Board offers data and power to the storage.

– Dimension : 48 x 29 x 6 mm (approx., including connector)
– Interface : Micro-USB3.0
– Connector : Compatible with 2.5inch SATA HDD / SSD
– Control IC : JMS578(VID:PID = 152D:0578)

This board works with ODROID-C1/C2 at USB2.0 speed. 

PERFORMANCE

An SSD write and read tests with ODROID-XU4 USB 3.0 on Linux Kernel 4.9.44.

Write test
Write : dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 4.26754 s, 252 MB/s

Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 4.1119 s, 261 MB/s

IOzone test

PACKAGE INCLUDES

– USB3.0 to SATA Bridge Board

** USB3.0AM to Micro USB Cable is sold separately.

BOARD DETAIL

Schematics : https://dn.odroid.com/Accessory/USB3.0%20to%20SATA%20BRIDGE%20PLUS_REV0.1_20170517.pdf

The Active-LED indicates the SATA device access. If you read/write the HDD/SSD, it will be blinking. Otherwise, it is solid on.
Even if there is no SATA device connected, the LED is solid on.

 

Compatible with ODROID-C1+, ODROID-C2, ODROID-C4, ODROID-H2, ODROID-H2plus, ODROID-N2, ODROID-N2plus, ODROID-XU4, ODROID-XU4Q