Description:

This “Case Type 7” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages can be blow out through the 92mm cooling fan holes on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan at the hole if the decent power for the fan is supplied.

• Supported storages:
  • On-board eMMC 5.1 module
  • On-board M.2 NVMe (NGFF-2280)
• Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)
• SATA Data & Power cables must be purchased
• This case is compatible with the H2 Net Card, which is not included in the package.
• The disk drive mounting screws (M3x6mm) are included in the package.
• The power and reset switches are accessible through the hole at the front
• Optional LED Power Button (diameter: 16mm) can be installed at the front
• Size : 128 (L) x 157 (W) x 111 (H) mm

 

Package contents:

• A. Bottom panel
• B. Front panel
• C. 2.5″ SATA HDD/SSD bracket
• D. 2.5″ SATA HDD/SSD bracket
• E. Left Panel
• F. Right panel
• G. Top panel
• H. Inner bracket
• I. Rear panel
• J. 16 x 6mm M3 Truss Head Bolts
• K. 4 x M5 Nuts
• L. 4 x M5 Truss Head Bolts
• M. 2 x 16x9mm (M) Steel PCB Supports
• N. 4 x 40mm (F) PCB Supports
• O. 4 x 20mm (M) PCB Supports
• P. 4 x 40mm (M) PCB Supports
• Q. 4 x Rubber Feet (Round / Clear)
• R. 1 x 92mm Stainless Cooling Fan Grill

 

*Please mind that photo includes spare parts image for some supports and screws. Standard part quantity for this product is same as Package contents description above.

 

Optional accessory

• I2C 20×4 LCD Module
• LED Power Button
• 16Port I2C GPIO Board
• H2 Net Card

 

Mechanical drawings

• https://dn.odroid.com/temp/box/ODROID-H2_TYPE7.dxf