USB3.0 to SATA Bridge Board

We have USB3.0 to SATA Bridge Board Plus available now.

Boost your ODROID-XU4 to the next level of storage performance with SSD or HDD.
USB3.0 to SATA Bridge Board contains a USB3.0 to SATA3 controller (Genesis GL3321G) allowing interfacing of a single 2.5″ SATA HDD/SDD.
USB3.0 to SATA Bridge Board offers data and power to the storage.

– Dimension : 48 x 29 x 6 mm (approx., including connector)
– Interface : Micro-USB3.0
– Connector : Compatible with 2.5inch SATA HDD / SSD
– Control IC : GL3321G2 (VID:PID = 05E3:0735)

– Schematics : DOWNLOAD

 

PERFORMANCE

An SSD write and read tests with ODROID-XU4 USB 3.0 on Linux platform in the real world.

Write test
dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 8.3077 s, 132.4 MB/s

Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 7.4352 s, 144 MB/s

An SSD write and read tests with ODROID-C1/C2 USB 2.0 on Linux platform in the real world.

Write test
dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 30.8774 s, 34.8 MB/s

Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 28.6036 s, 37.5 MB/s

 

PACKAGE INCLUDES

– USB3.0 to SATA Bridge Board
– 4 x Black rubber rings (it is necessary when you install a HDD/SDD into the VuShell for VU7.)

** USB3.0AM to Micro USB Cable is sold separately.

 

BOARD DETAIL

 

 

 

SET-UP with ODROID-XU4 and SSD