{"id":11311,"date":"2012-08-07T20:30:39","date_gmt":"2012-08-07T11:30:39","guid":{"rendered":"https:\/\/www.hardkernel.com\/?p=11311"},"modified":"2018-11-29T15:38:51","modified_gmt":"2018-11-29T06:38:51","slug":"linux-kernel-3-6-rc1-runs-ubuntu-12-04-on-odroid-x","status":"publish","type":"post","link":"https:\/\/www.hardkernel.com\/ko\/blog\/linux-kernel-3-6-rc1-runs-ubuntu-12-04-on-odroid-x\/","title":{"rendered":"Linux Kernel 3.6-rc1 runs Ubuntu 12.04 on ODROID-X"},"content":{"rendered":"<p>There are updates!<br \/>\nRead below article and jump to here to get the latest version.<br \/>\nhttp:\/\/odroid.foros-phpbb.com\/t1171-linux-kernel-36-rc4-runs-ubuntu-1204-on-odroid-x<\/p>\n<p>We&#8217;ve just made an initial port of Linux Kernel 3.6-rc1 which can run Ubuntu 12.04 with ODROID-X.<br \/>\nNote that Ubuntu root file system is came from Linaro 12.07 release. User ID and password are &#8220;linaro&#8221; and &#8220;linaro&#8221;.<\/p>\n<p>Here are some pictures show it runs Firefox and System-Monitor in Ubuntu.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-11312\" src=\"https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208072028006174.jpg\" alt=\"\" width=\"720\" height=\"480\" srcset=\"https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208072028006174.jpg 720w, https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208072028006174-247x165.jpg 247w, https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208072028006174-510x340.jpg 510w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><\/p>\n<p>Ubuntu runs in 1080p mode<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-11314\" src=\"https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208072028202064.jpg\" alt=\"\" width=\"720\" height=\"480\" srcset=\"https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208072028202064.jpg 720w, https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208072028202064-247x165.jpg 247w, https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208072028202064-510x340.jpg 510w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><\/p>\n<p>&nbsp;<\/p>\n<p>This is a full booting log with Ubuntu 12.04. We captured this log with USB-UART kit.<\/p>\n<pre class=\"code bash target\">U-Boot 2010.12 (Aug 06 2012 - 11:50:16) for ODROID4412\r\n\r\n\r\nCPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]\r\nAPLL = 1000MHz, MPLL = 800MHz\r\nDRAM:\u00a0 1023 MiB\r\n\r\nPMIC VERSION : 0x00, CHIP REV : 2\r\n\r\nBL1 version: N\/A (TrustZone Enabled BSP)\r\n\r\n\r\nChecking Boot Mode ... SDMMC\r\nREVISION: 1.1\r\nMMC Device 0: 7695 MB\r\n[ERROR] response timeout error : 00000104 cmd 1\r\nFAIL: waiting for status update.\r\nMMC Device 1: 0 MB\r\nMMC Device 2 not found\r\nModeKey Check... run normal_boot\r\nNet:\u00a0\u00a0 No ethernet found.\r\nHit any key to stop autoboot:\u00a0 0\r\nreading kernel..device 0 Start 1057, Count 16384\r\nMMC read: dev # 0, block # 1057, count 16384 ... 16384 blocks read: OK\r\ncompleted\r\nBoot with zImage\r\n\r\nStarting kernel ...\r\n\r\nUncompressing Linux... done, booting the kernel.\r\n[\u00a0\u00a0\u00a0 0.000000] Booting Linux on physical CPU 0\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0Linux version 3.6.0-rc1\u00a0(ruppi@ruppi-Virtualbox) (gcc version 4.7.1\u00a0(Ubuntu\/Linaro 4.7.1-5ubuntu1~ppa1) ) #5 SMP PREEMPT Tue Aug 7 13:39:13 KST 2012\r\n[\u00a0\u00a0\u00a0 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d\r\n[\u00a0\u00a0\u00a0 0.000000] CPU: PIPT \/ VIPT nonaliasing data cache, VIPT aliasing instruction cache\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0Machine: ODROID-X\r\n[\u00a0\u00a0\u00a0 0.000000] cma: CMA: reserved 16 MiB at 6e800000\r\n[\u00a0\u00a0\u00a0 0.000000] Memory policy: ECC disabled, Data cache writealloc\r\n[\u00a0\u00a0\u00a0 0.000000] CPU EXYNOS4412 (id 0xe4412211)\r\n[\u00a0\u00a0\u00a0 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics\r\n[\u00a0\u00a0\u00a0 0.000000] s3c_register_clksrc: clock armclk has no registers set\r\n[\u00a0\u00a0\u00a0 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=108000000\r\n[\u00a0\u00a0\u00a0 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=160000000\r\n[\u00a0\u00a0\u00a0 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 50000000\r\n[\u00a0\u00a0\u00a0 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 50000000\r\n[\u00a0\u00a0\u00a0 0.000000] PERCPU: Embedded 7 pages\/cpu @c0d65000 s7232 r8192 d13248 u32768\r\n[\u00a0\u00a0\u00a0 0.000000] Built 1 zonelists in Zone order, mobility grouping on.\u00a0 Total pages: 255746\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0Kernel command line: root=\/dev\/mmcblk0p3 rw rootfstype=ext4 init=\/sbin\/init console=ttySAC1,115200 console=tty1 rootdelay=2\r\n[\u00a0\u00a0\u00a0 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)\r\n[\u00a0\u00a0\u00a0 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)\r\n[\u00a0\u00a0\u00a0 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0Memory: 48MB 216MB 743MB = 1007MB total\r\n[\u00a0\u00a0\u00a0 0.000000] Memory: 1000072k\/1016456k available, 31096k reserved, 269312K highmem\r\n[\u00a0\u00a0\u00a0 0.000000] Virtual kernel memory layout:\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0 vector\u00a0 : 0xffff0000 - 0xffff1000\u00a0\u00a0 (\u00a0\u00a0 4 kB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0 fixmap\u00a0 : 0xfff00000 - 0xfffe0000\u00a0\u00a0 ( 896 kB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0 vmalloc : 0xf0000000 - 0xff000000\u00a0\u00a0 ( 240 MB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0 lowmem\u00a0 : 0xc0000000 - 0xef800000\u00a0\u00a0 ( 760 MB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0 pkmap\u00a0\u00a0 : 0xbfe00000 - 0xc0000000\u00a0\u00a0 (\u00a0\u00a0 2 MB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0 modules : 0xbf000000 - 0xbfe00000\u00a0\u00a0 (\u00a0 14 MB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 .text : 0xc0008000 - 0xc04a453c\u00a0\u00a0 (4722 kB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 .init : 0xc04a5000 - 0xc04ccc40\u00a0\u00a0 ( 160 kB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 .data : 0xc04ce000 - 0xc051e640\u00a0\u00a0 ( 322 kB)\r\n[\u00a0\u00a0\u00a0 0.000000]\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 .bss : 0xc051e664 - 0xc05577f0\u00a0\u00a0 ( 229 kB)\r\n[\u00a0\u00a0\u00a0 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1\r\n[\u00a0\u00a0\u00a0 0.000000] Preemptible hierarchical RCU implementation.\r\n[\u00a0\u00a0\u00a0 0.000000] NR_IRQS:549\r\n[\u00a0\u00a0\u00a0 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms\r\n[\u00a0\u00a0\u00a0 0.000000] Console: colour dummy device 80x30\r\n[\u00a0\u00a0\u00a0 0.000000] console [tty1] enabled\r\n[\u00a0\u00a0\u00a0 0.045000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)\r\n[\u00a0\u00a0\u00a0 0.045000] pid_max: default: 32768 minimum: 301\r\n[\u00a0\u00a0\u00a0 0.045000] Mount-cache hash table entries: 512\r\n[\u00a0\u00a0\u00a0 0.045000] CPU: Testing write buffer coherency: ok\r\n[\u00a0\u00a0\u00a0 0.045000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00\r\n[\u00a0\u00a0\u00a0 0.045000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available\r\n[\u00a0\u00a0\u00a0 0.045000] Setting up static identity map for 0x4036fdd8 - 0x4036fe30\r\n[\u00a0\u00a0\u00a0 0.045000] L310 cache controller enabled\r\n[\u00a0\u00a0\u00a0 0.045000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B\r\n[\u00a0\u00a0\u00a0 0.070000] CPU1: Booted secondary processor\r\n[\u00a0\u00a0\u00a0 0.090000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01\r\n[\u00a0\u00a0\u00a0 0.090000] CPU1: Unknown IPI message 0x1\r\n[\u00a0\u00a0\u00a0 0.100000] CPU2: Booted secondary processor\r\n[\u00a0\u00a0\u00a0 0.120000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02\r\n[\u00a0\u00a0\u00a0 0.120000] CPU2: Unknown IPI message 0x1\r\n[\u00a0\u00a0\u00a0 0.130000] CPU3: Booted secondary processor\r\n[\u00a0\u00a0\u00a0 0.150000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03\r\n[\u00a0\u00a0\u00a0 0.150000] CPU3: Unknown IPI message 0x1\r\n[\u00a0\u00a0\u00a0 0.150000] Brought up 4 CPUs\r\n[\u00a0\u00a0\u00a0 0.150000] SMP: Total of 4 processors activated (7969.17 BogoMIPS).\r\n[\u00a0\u00a0\u00a0 0.155000] dummy:\r\n[\u00a0\u00a0\u00a0 0.155000] NET: Registered protocol family 16\r\n[\u00a0\u00a0\u00a0 0.160000] DMA: preallocated 256 KiB pool for atomic coherent allocations\r\n[\u00a0\u00a0\u00a0 0.165000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.\r\n[\u00a0\u00a0\u00a0 0.165000] hw-breakpoint: maximum watchpoint size is 4 bytes.\r\n[\u00a0\u00a0\u00a0 0.165000] S3C Power Management, Copyright 2004 Simtec Electronics\r\n[\u00a0\u00a0\u00a0 0.165000] EXYNOS4x12 PMU Initialize\r\n[\u00a0\u00a0\u00a0 0.170000] EXYNOS: Initializing architecture\r\n[\u00a0\u00a0\u00a0 0.175000] bio: create slab\u00a0at 0\r\n[\u00a0\u00a0\u00a0 0.180000] hdmi_5v: 5000 mV\r\n[\u00a0\u00a0\u00a0 0.180000] usbcore: registered new interface driver usbfs\r\n[\u00a0\u00a0\u00a0 0.180000] usbcore: registered new interface driver hub\r\n[\u00a0\u00a0\u00a0 0.180000] usbcore: registered new device driver usb\r\n[\u00a0\u00a0\u00a0 0.180000] s3c-i2c s3c2440-i2c.0: slave address 0x10\r\n[\u00a0\u00a0\u00a0 0.180000] s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz\r\n[\u00a0\u00a0\u00a0 0.180000] max77686 0-0009: device found\r\n[\u00a0\u00a0\u00a0 0.180000] max77686 0-0009: irq is not specified\r\n[\u00a0\u00a0\u00a0 0.185000] LDO1 VDD_ALIVE: 1000 mV\r\n[\u00a0\u00a0\u00a0 0.185000] LDO2 VDDQ_M1_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.190000] LDO3 VDDQ_AUD_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.190000] LDO4 VDDQ_MMC2_2V8: 2800 mV\r\n[\u00a0\u00a0\u00a0 0.195000] LDO5 VDDQ_MMC1_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.195000] LDO6 VDD10_MPLL_1V0: 1000 mV\r\n[\u00a0\u00a0\u00a0 0.200000] LDO7 VDD10_EPLL_1V0: 1000 mV\r\n[\u00a0\u00a0\u00a0 0.205000] LDO8 VDD10_MIPI_1V0: 1000 mV\r\n[\u00a0\u00a0\u00a0 0.205000] LDO9 VT_CORE_1V0: 1000 mV\r\n[\u00a0\u00a0\u00a0 0.210000] LDO10 VDD18_MIPI_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.210000] vdd_ldo11 range: 1900 mV\r\n[\u00a0\u00a0\u00a0 0.215000] LDO12 VDD33_UOTG_3V3: 3300 mV\r\n[\u00a0\u00a0\u00a0 0.215000] LDO13 VDD18_MIPIHSI_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.220000] vdd_ldo14 range: 1900 mV\r\n[\u00a0\u00a0\u00a0 0.225000] LDO15 VDD10_OTG: 1000 mV\r\n[\u00a0\u00a0\u00a0 0.225000] LDO16 VDD18_HSIC: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.230000] LDO17 VDDQ_CAM_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.230000] LDO18 VDDQ_ISP_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.230000] LDO19 VT_CAM_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.235000] LDO20 EMMC_IO_1V8: 1900 mV\r\n[\u00a0\u00a0\u00a0 0.235000] LDO21 TFLASH_2V8: 3300 mV\r\n[\u00a0\u00a0\u00a0 0.240000] LDO22: 3300 mV\r\n[\u00a0\u00a0\u00a0 0.240000] LDO23 VDD_TOUCH_2V8: 2800 mV\r\n[\u00a0\u00a0\u00a0 0.245000] LDO24 VDD_TOUCHLED_3V3: 3300 mV\r\n[\u00a0\u00a0\u00a0 0.245000] LDO25 VDDQ_LCD_1V8: 1800 mV\r\n[\u00a0\u00a0\u00a0 0.250000] LDO26 VDD_MOTOR_3V0: 3000 mV\r\n[\u00a0\u00a0\u00a0 0.250000] vdd_mif range: 800 &lt;--&gt; 1050 mV at 1000 mV\r\n[\u00a0\u00a0\u00a0 0.250000] vdd_arm range: 800 &lt;--&gt; 1350 mV at 1100 mV\r\n[\u00a0\u00a0\u00a0 0.255000] vdd_int range: 800 &lt;--&gt; 1150 mV at 1000 mV\r\n[\u00a0\u00a0\u00a0 0.255000] vdd_g3d range: 850 &lt;--&gt; 1200 mV at 1000 mV\r\n[\u00a0\u00a0\u00a0 0.255000] BUCK5 VDDQ_CKEM1_2: 1200 mV\r\n[\u00a0\u00a0\u00a0 0.260000] BUCK6 1V35: 1350 mV\r\n[\u00a0\u00a0\u00a0 0.265000] BUCK7 2V0: 2000 mV\r\n[\u00a0\u00a0\u00a0 0.265000] BUCK8 3V3: 3300 mV\r\n[\u00a0\u00a0\u00a0 0.270000] BUCK9 1V2: 1200 mV\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.1: slave address 0x10\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.3: slave address 0x10\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.3: bus frequency set to 97 KHz\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.7: slave address 0x10\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.7: bus frequency set to 97 KHz\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 97 KHz\r\n[\u00a0\u00a0\u00a0 0.270000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter\r\n[\u00a0\u00a0\u00a0 0.270000] Linux video capture interface: v2.00\r\n[\u00a0\u00a0\u00a0 0.270000] Advanced Linux Sound Architecture Driver Version 1.0.25.\r\n[\u00a0\u00a0\u00a0 0.270000] cfg80211: Calling CRDA to update world regulatory domain\r\n[\u00a0\u00a0\u00a0 0.270000] Switching to clocksource mct-frc\r\n[\u00a0\u00a0\u00a0 0.280000] NET: Registered protocol family 2\r\n[\u00a0\u00a0\u00a0 0.280000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)\r\n[\u00a0\u00a0\u00a0 0.280000] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)\r\n[\u00a0\u00a0\u00a0 0.280000] TCP: Hash tables configured (established 131072 bind 65536)\r\n[\u00a0\u00a0\u00a0 0.285000] TCP: reno registered\r\n[\u00a0\u00a0\u00a0 0.285000] UDP hash table entries: 512 (order: 3, 32768 bytes)\r\n[\u00a0\u00a0\u00a0 0.285000] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)\r\n[\u00a0\u00a0\u00a0 0.285000] NET: Registered protocol family 1\r\n[\u00a0\u00a0\u00a0 0.285000] bounce pool size: 64 pages\r\n[\u00a0\u00a0\u00a0 0.295000] msgmni has been set to 1459\r\n[\u00a0\u00a0\u00a0 0.295000] io scheduler noop registered\r\n[\u00a0\u00a0\u00a0 0.295000] io scheduler deadline registered\r\n[\u00a0\u00a0\u00a0 0.295000] io scheduler cfq registered (default)\r\n[\u00a0\u00a0\u00a0 0.295000] start plist test\r\n[\u00a0\u00a0\u00a0 0.300000] end plist test\r\n[\u00a0\u00a0\u00a0 0.300000] s3c-fb exynos4-fb.0: start latency exceeded, new value 750 ns\r\n[\u00a0\u00a0\u00a0 0.300000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 35500 ns\r\n[\u00a0\u00a0\u00a0 0.320000] Console: switching to colour frame buffer device 170x48\r\n[\u00a0\u00a0\u00a0 0.330000] s3c-fb exynos4-fb.0: window 0: fb\r\n[\u00a0\u00a0\u00a0 0.335000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056\r\n[\u00a0\u00a0\u00a0 0.335000] dma-pl330 dma-pl330.0: \u00a0\u00a0\u00a0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32\r\n[\u00a0\u00a0\u00a0 0.340000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056\r\n[\u00a0\u00a0\u00a0 0.340000] dma-pl330 dma-pl330.1: \u00a0\u00a0\u00a0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32\r\n[\u00a0\u00a0\u00a0 0.345000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056\r\n[\u00a0\u00a0\u00a0 0.345000] dma-pl330 dma-pl330.2: \u00a0\u00a0\u00a0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32\r\n[\u00a0\u00a0\u00a0 0.405000] Serial: 8250\/16550 driver, 4 ports, IRQ sharing disabled\r\n[\u00a0\u00a0\u00a0 0.410000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400\/10\r\n[\u00a0\u00a0\u00a0 0.410000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400\/10\r\n[\u00a0\u00a0\u00a0 1.280000] console [ttySAC1] enabled\r\n[\u00a0\u00a0\u00a0 1.285000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400\/10\r\n[\u00a0\u00a0\u00a0 1.295000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400\/10\r\n[\u00a0\u00a0\u00a0 1.310000] brd: module loaded\r\n[\u00a0\u00a0\u00a0 1.315000] loop: module loaded\r\n[\u00a0\u00a0\u00a0 1.320000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\r\n[\u00a0\u00a0\u00a0 1.320000] s5p-ehci s5p-ehci: S5P EHCI Host Controller\r\n[\u00a0\u00a0\u00a0 1.325000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1\r\n[\u00a0\u00a0\u00a0 1.335000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000\r\n[\u00a0\u00a0\u00a0 1.350000] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00\r\n[\u00a0\u00a0\u00a0 1.350000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002\r\n[\u00a0\u00a0\u00a0 1.355000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1\r\n[\u00a0\u00a0\u00a0 1.365000] usb usb1: Product: S5P EHCI Host Controller\r\n[\u00a0\u00a0\u00a0 1.370000] usb usb1: Manufacturer: Linux 3.6.0-rc1 ehci_hcd\r\n[\u00a0\u00a0\u00a0 1.375000] usb usb1: SerialNumber: s5p-ehci\r\n[\u00a0\u00a0\u00a0 1.380000] hub 1-0:1.0: USB hub found\r\n[\u00a0\u00a0\u00a0 1.385000] hub 1-0:1.0: 3 ports detected\r\n[\u00a0\u00a0\u00a0 1.385000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver\r\n[\u00a0\u00a0\u00a0 1.395000] exynos-ohci exynos-ohci: Already power on PHY\r\n[\u00a0\u00a0\u00a0 1.400000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller\r\n[\u00a0\u00a0\u00a0 1.405000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2\r\n[\u00a0\u00a0\u00a0 1.410000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000\r\n[\u00a0\u00a0\u00a0 1.475000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001\r\n[\u00a0\u00a0\u00a0 1.480000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1\r\n[\u00a0\u00a0\u00a0 1.490000] usb usb2: Product: EXYNOS OHCI Host Controller\r\n[\u00a0\u00a0\u00a0 1.495000] usb usb2: Manufacturer: Linux 3.6.0-rc1 ohci_hcd\r\n[\u00a0\u00a0\u00a0 1.500000] usb usb2: SerialNumber: exynos-ohci\r\n[\u00a0\u00a0\u00a0 1.505000] hub 2-0:1.0: USB hub found\r\n[\u00a0\u00a0\u00a0 1.505000] hub 2-0:1.0: 3 ports detected\r\n[\u00a0\u00a0\u00a0 1.510000] usb3503: USB HUB driver init\r\n[\u00a0\u00a0\u00a0 1.515000] usb3503: usb3503_probe:375\r\n[\u00a0\u00a0\u00a0 1.520000] usb3503: usb3503_set_mode: mode = 1\r\n[\u00a0\u00a0\u00a0 1.630000] usb3503: usb3503_register_write: reg: e7 data: 3 write failed\r\n[\u00a0\u00a0\u00a0 1.630000] usb3503: reg_write: write E7, req:03, val:00\r\n[\u00a0\u00a0\u00a0 1.635000] usb3503: SP_ILOCK write fail err = -111\r\n[\u00a0\u00a0\u00a0 1.640000] usb3503: usb3503_probe: probed on\u00a0 hub mode\r\n[\u00a0\u00a0\u00a0 1.645000] i2c-core: driver [usb3503] using legacy suspend method\r\n[\u00a0\u00a0\u00a0 1.655000] i2c-core: driver [usb3503] using legacy resume method\r\n[\u00a0\u00a0\u00a0 1.660000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling\r\n[\u00a0\u00a0\u00a0 1.665000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0\r\n[\u00a0\u00a0\u00a0 1.670000] s5p-hdmiphy 8-0038: probe successful\r\n[\u00a0\u00a0\u00a0 1.685000] s5p-hdmi exynos4-hdmi: probe successful\r\n[\u00a0\u00a0\u00a0 1.690000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.\r\n[\u00a0\u00a0\u00a0 1.695000] s5p-mixer s5p-mixer: probe start\r\n[\u00a0\u00a0\u00a0 1.700000] s5p-mixer s5p-mixer: resources acquired\r\n[\u00a0\u00a0\u00a0 1.705000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'\r\n[\u00a0\u00a0\u00a0 1.710000] s5p-mixer s5p-mixer: module s5p-sdo is missing\r\n[\u00a0\u00a0\u00a0 1.715000] s5p-mixer s5p-mixer: registered layer graph0 as \/dev\/video0\r\n[\u00a0\u00a0\u00a0 1.725000] fb1: registered frame buffer emulation for \/dev\/video0\r\n[\u00a0\u00a0\u00a0 1.730000] s5p-mixer s5p-mixer: registered layer graph1 as \/dev\/video1\r\n[\u00a0\u00a0\u00a0 1.735000] fb2: registered frame buffer emulation for \/dev\/video1\r\n[\u00a0\u00a0\u00a0 1.745000] s5p-mixer s5p-mixer: registered layer video0 as \/dev\/video2\r\n[\u00a0\u00a0\u00a0 1.750000] fb3: registered frame buffer emulation for \/dev\/video2\r\n[\u00a0\u00a0\u00a0 1.755000] s5p-mixer s5p-mixer: probe successful\r\n[\u00a0\u00a0\u00a0 1.760000] sdhci: Secure Digital Host Controller Interface driver\r\n[\u00a0\u00a0\u00a0 1.765000] sdhci: Copyright(c) Pierre Ossman\r\n[\u00a0\u00a0\u00a0 1.770000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (88888888 Hz)\r\n[\u00a0\u00a0\u00a0 1.780000] mmc0: no vmmc regulator found\r\n[\u00a0\u00a0\u00a0 1.810000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA\r\n[\u00a0\u00a0\u00a0 1.810000] s3c-sdhci exynos4-sdhci.3: clock source 2: mmc_busclk.2 (88888888 Hz)\r\n[\u00a0\u00a0\u00a0 1.820000] mmc1: no vmmc regulator found\r\n[\u00a0\u00a0\u00a0 1.850000] mmc0: new high speed SDHC card at address b368\r\n[\u00a0\u00a0\u00a0 1.855000] usb 1-2: new high-speed USB device number 2 using s5p-ehci\r\n[\u00a0\u00a0\u00a0 1.860000] mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.3] using ADMA\r\n[\u00a0\u00a0\u00a0 1.870000] mmcblk0: mmc0:b368 00000 7.51 GiB\r\n[\u00a0\u00a0\u00a0 1.870000] usbcore: registered new interface driver usbhid\r\n[\u00a0\u00a0\u00a0 1.870000] usbhid: USB HID core driver\r\n[\u00a0\u00a0\u00a0 1.870000] TCP: cubic registered\r\n[\u00a0\u00a0\u00a0 1.870000] NET: Registered protocol family 17\r\n[\u00a0\u00a0\u00a0 1.870000] NET: Registered protocol family 15\r\n[\u00a0\u00a0\u00a0 1.870000] NET: Registered protocol family 35\r\n[\u00a0\u00a0\u00a0 1.900000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4\r\n[\u00a0\u00a0\u00a0 1.900000]\u00a0 mmcblk0: p1 p2 p3\r\n[\u00a0\u00a0\u00a0 1.910000] Registering SWP\/SWPB emulation handler\r\n[\u00a0\u00a0\u00a0 1.915000] vdd_g3d range: incomplete constraints, leaving on\r\n[\u00a0\u00a0\u00a0 1.920000] LDO25 VDDQ_LCD_1V8: incomplete constraints, leaving on\r\n[\u00a0\u00a0\u00a0 1.925000] s3c-rtc s3c64xx-rtc: setting system clock to 2012-08-07 08:30:44 UTC (1344328244)\r\n[\u00a0\u00a0\u00a0 1.935000] ALSA device list:\r\n[\u00a0\u00a0\u00a0 1.935000]\u00a0\u00a0 No soundcards found.\r\n[\u00a0\u00a0\u00a0 1.940000] Waiting 2sec before mounting root device...\r\n[\u00a0\u00a0\u00a0 1.990000] usb 1-2: New USB device found, idVendor=0424, idProduct=3503\r\n[\u00a0\u00a0\u00a0 1.990000] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0\r\n[\u00a0\u00a0\u00a0 2.000000] hub 1-2:1.0: USB hub found\r\n[\u00a0\u00a0\u00a0 2.005000] hub 1-2:1.0: 3 ports detected\r\n[\u00a0\u00a0\u00a0 2.295000] usb 1-2.1: new high-speed USB device number 3 using s5p-ehci\r\n[\u00a0\u00a0\u00a0 2.400000] usb 1-2.1: New USB device found, idVendor=0424, idProduct=9514\r\n[\u00a0\u00a0\u00a0 2.400000] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0\r\n[\u00a0\u00a0\u00a0 2.410000] hub 1-2.1:1.0: USB hub found\r\n[\u00a0\u00a0\u00a0 2.415000] hub 1-2.1:1.0: 5 ports detected\r\n[\u00a0\u00a0\u00a0 2.705000] usb 1-2.1.1: new high-speed USB device number 4 using s5p-ehci\r\n[\u00a0\u00a0\u00a0 2.810000] usb 1-2.1.1: New USB device found, idVendor=0424, idProduct=ec00\r\n[\u00a0\u00a0\u00a0 2.810000] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0\r\n[\u00a0\u00a0\u00a0 2.910000] usb 1-2.1.3: new low-speed USB device number 5 using s5p-ehci\r\n[\u00a0\u00a0\u00a0 3.005000] usb 1-2.1.3: New USB device found, idVendor=15d9, idProduct=0a4c\r\n[\u00a0\u00a0\u00a0 3.010000] usb 1-2.1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0\r\n[\u00a0\u00a0\u00a0 3.020000] usb 1-2.1.3: Product:\u00a0 USB OPTICAL MOUSE\r\n[\u00a0\u00a0\u00a0 3.025000] input:\u00a0 USB OPTICAL MOUSE as \/devices\/platform\/s5p-ehci\/usb1\/1-2\/1-2.1\/1-2.1.3\/1-2.1.3:1.0\/input\/input0\r\n[\u00a0\u00a0\u00a0 3.035000] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-s5p-ehci-2.1.3\/input0\r\n[\u00a0\u00a0\u00a0 3.130000] usb 1-2.1.5: new low-speed USB device number 6 using s5p-ehci\r\n[\u00a0\u00a0\u00a0 3.250000] usb 1-2.1.5: New USB device found, idVendor=04d9, idProduct=1203\r\n[\u00a0\u00a0\u00a0 3.255000] usb 1-2.1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0\r\n[\u00a0\u00a0\u00a0 3.275000] input: HID 04d9:1203 as \/devices\/platform\/s5p-ehci\/usb1\/1-2\/1-2.1\/1-2.1.5\/1-2.1.5:1.0\/input\/input1\r\n[\u00a0\u00a0\u00a0 3.280000] hid-generic 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-s5p-ehci-2.1.5\/input0\r\n[\u00a0\u00a0\u00a0 3.310000] input: HID 04d9:1203 as \/devices\/platform\/s5p-ehci\/usb1\/1-2\/1-2.1\/1-2.1.5\/1-2.1.5:1.1\/input\/input2\r\n[\u00a0\u00a0\u00a0 3.315000] hid-generic 0003:04D9:1203.0003: input,hidraw2: USB HID v1.11 Device [HID 04d9:1203] on usb-s5p-ehci-2.1.5\/input1\r\n[\u00a0\u00a0 12.310000] EXT4-fs (mmcblk0p3): 4 orphan inodes deleted\r\n[\u00a0\u00a0 12.310000] EXT4-fs (mmcblk0p3): recovery complete\r\n[\u00a0\u00a0 13.685000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)\r\n[\u00a0\u00a0 13.690000] VFS: Mounted root (ext4 filesystem) on device 179:3.\r\n[\u00a0\u00a0 13.695000] Freeing init memory: 156K\r\n[\u00a0\u00a0 21.075000] s3c-hsotg s3c-hsotg: Failed to get supply 'vusb_d': -517\r\n[\u00a0\u00a0 21.080000] s3c-hsotg s3c-hsotg: failed to request supplies: -517\r\n[\u00a0\u00a0 21.585000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 21.605000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 21.695000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 21.710000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 21.895000] s3c-hsotg s3c-hsotg: Failed to get supply 'vusb_d': -517\r\n[\u00a0\u00a0 21.900000] s3c-hsotg s3c-hsotg: failed to request supplies: -517\r\n[\u00a0\u00a0 22.505000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 22.795000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 22.815000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 22.820000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.275000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.295000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.305000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.310000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.320000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.325000] init: Failed to create pty - disabling logging for job\r\n\r\n[\u00a0\u00a0 23.345000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.405000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.410000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.425000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.430000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.435000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.445000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.450000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.455000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.460000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.475000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.495000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.820000] init: Failed to create pty - disabling logging for job\r\n[\u00a0\u00a0 23.840000] init: Failed to create pty - disabling logging for job\r\nLast login: Tue Aug\u00a0 7 07:54:18 UTC 2012 on tty1\r\nWelcome to Linaro 12.07 (GNU\/Linux 3.6.0-rc1 armv7l)\r\n\r\n* Documentation:\u00a0 https:\/\/wiki.linaro.org\/\r\n\r\n106 packages can be updated.\r\n20 updates are security updates.\r\n\r\nroot@linaro-ubuntu-desktop:~#\r\n<\/pre>\n<p>&nbsp;<\/p>\n<p>Yes!<br \/>\nThere are many points to reduce the booting time.<br \/>\nLet&#8217;s find how to improve it!<\/p>\n<p>We&#8217;ve implemented and tested below features.<br \/>\n&#8211; Linux Kernel 3.6-rc1 with gcc 4.7.1 Linaro toolchain<br \/>\n&#8211; SMP driven Quad-Core processing<br \/>\n&#8211; PMIC device driver<br \/>\n&#8211; USB 2.0 High-speed Host driver for Exynos-4412 HSIC interface<br \/>\n&#8211; Ethernet + USB Hub device driver<br \/>\n&#8211; LCD display driver<br \/>\n&#8211; HDMI display driver (Very early version and it may have HDMI 1.4a compatibility issues with some monitors)<\/p>\n<p>Known issues.<br \/>\n&#8211; Audio codec driver is not ported (We will implement this within couple of weeks)<br \/>\n&#8211; eMMC device driver is not ported (We will implement this within couple of weeks)<br \/>\n&#8211; Clock control driver is not ported (We will change the default clock from 1Ghz to 1.5Ghz soon)<br \/>\n&#8211; 3D HW-GPU X11 driver is not ready (This may need couple of months)<br \/>\n&#8211; Power-off\u00a0 (Power off function of Ubuntu GUI is not working. There is no way to power off except for unplugging DC plug. OTL)<br \/>\n&#8211; WiFi module is not working with Ubuntu GUI. (Command line of Wireless-tools may work)<br \/>\n&#8211; Many other issues<\/p>\n<p>This WiKi describes how to build it and how to use pre-built image for SD-card.<br \/>\n<a href=\"http:\/\/dev.odroid.com\/projects\/odroid-xq\/#s-3.2\" target=\"_blank\" rel=\"noopener\">http:\/\/dev.odroid.com\/projects\/odroid-xq\/#s-3.2<\/a><\/p>\n<p>You can download the pre-built images from this bit-torrent.<br \/>\n<a title=\"Ubuntu-12.04-For-Odroid-X_20120807.torrent\" href=\"https:\/\/com.odroid.com\/sigong\/dl\/dw.php?path=2012\/201208\/203420120807175239.torr&amp;file_nm=Ubuntu-12.04-For-Odroid-X_20120807.torrent\" target=\"_blank\" rel=\"noopener\">bit-torrent Ubuntu-ODROIDX<\/a><br \/>\nThere are two different pre-built images.<br \/>\n#1. Image file for LCD display<br \/>\n#2. Image file for HDMI display<\/p>\n<p>Please note this version doesn&#8217;t support eMMC. So you must plug JP2-jumper.<br \/>\nIf your HDMI monitor supports only 720p, you must unplug JP1-jumper. If your monitor supports 1080p, plug JP1-jumper.<br \/>\nWe need to implement automatic detection function in future.<\/p>\n<p>Refer below picture to know where is JP1 &amp; JP2.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-11317\" src=\"https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208071955168737.jpg\" alt=\"\" width=\"720\" height=\"480\" srcset=\"https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208071955168737.jpg 720w, https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208071955168737-247x165.jpg 247w, https:\/\/www.hardkernel.com\/wp-content\/uploads\/2018\/11\/201208071955168737-510x340.jpg 510w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><\/p>\n","protected":false},"excerpt":{"rendered":"<p>There are updates! Read below article and jump to here to get the latest version. http:\/\/odroid.foros-phpbb.com\/t1171-linux-kernel-36-rc4-runs-ubuntu-1204-on-odroid-x We&#8217;ve just made an initial port of Linux Kernel 3.6-rc1 which can run Ubuntu 12.04 with ODROID-X. Note that Ubuntu root file system is came from Linaro 12.07 release. User ID and password are &#8220;linaro&#8221; and &#8220;linaro&#8221;. Here are [&#8230;]\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[18463],"tags":[20901],"class_list":["post-11311","post","type-post","status-publish","format-standard","hentry","category-blog","tag-odroid-x"],"_links":{"self":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/11311","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/comments?post=11311"}],"version-history":[{"count":4,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/11311\/revisions"}],"predecessor-version":[{"id":11323,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/11311\/revisions\/11323"}],"wp:attachment":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/media?parent=11311"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/categories?post=11311"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/tags?post=11311"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}