{"id":11341,"date":"2012-07-29T16:05:45","date_gmt":"2012-07-29T07:05:45","guid":{"rendered":"https:\/\/www.hardkernel.com\/?p=11341"},"modified":"2018-11-29T16:08:43","modified_gmt":"2018-11-29T07:08:43","slug":"usb-uart-module-kit","status":"publish","type":"post","link":"https:\/\/www.hardkernel.com\/ko\/blog\/usb-uart-module-kit\/","title":{"rendered":"USB-UART Module Kit"},"content":{"rendered":"<p>There is a system console port in all of ODROID series to monitor the low-level information of target system.<br \/>\nThis is very useful and important tool for platform software development.<\/p>\n<p>The system console port uses UART(Universal asynchronous receiver\/transmitter) of CPU for communication between your host PC and target board.<br \/>\nProtocol is 115200bps \/ no-parity \/ 8bit \/ 1-stop-bit \/ No-flowcontrol as usual.<br \/>\nYou can use any tty terminal software such puTTY, minicom or hyperTerminal in your host PC.<\/p>\n<p>The UART of CPU has simple 2 signals Tx and Rx with a ground level for communication.<br \/>\nPlease note most of new comming mobile processors have 1.8V of IO voltage to minimize power consumption.<\/p>\n<p>In traditional design, there should be a RS-232C level converter MAX232 or MAX3232 or MAX3218 on board.<br \/>\nAddtionally your Host PC must have a RS-232C port.<br \/>\nNote that all of modern PC \/ Laptop have no built-in RS-232C port you have to buy a USB-RS232 converter.<br \/>\nSo this solution is expensive, uncomfortable and bigger footprint.<\/p>\n<p>Fortunately, there are many IC makers have introduced USB-UART bridge ICs.<\/p>\n<p>To meet the low voltage interface specification. we chose the CP2104 USB-UART bridge IC from the Silicon Labs.<br \/>\nYou can find the datasheet of CP2104 and its drivers from this link.<br \/>\n<a href=\"http:\/\/www.silabs.com\/products\/interface\/usbtouart\/Pages\/usb-to-uart-bridge.aspx\" target=\"_blank\" rel=\"noopener\">http:\/\/www.silabs.com\/products\/interface\/usbtouart\/Pages\/usb-to-uart-bridge.aspx<\/a><\/p>\n<p>CP2104 has internal oscillator, LDO, Tx\/Rx indicating LED drivers and 1.8Volt IO with reasonable price in 4mmx4mm package.<\/p>\n<div><img decoding=\"async\" src=\"http:\/\/i49.servimg.com\/u\/f49\/15\/19\/21\/68\/cp210410.jpg\" border=\"0\" \/><br \/>\nUSB-UART Module kit contains below 3 items.- Micro-USB cable<br \/>\n&#8211; USB-UART board with CP2104<br \/>\n&#8211; 4pin wire harness to connect to ODROID-X<\/p>\n<\/div>\n<p><img decoding=\"async\" src=\"http:\/\/i49.servimg.com\/u\/f49\/15\/19\/21\/68\/20120720.jpg\" border=\"0\" \/><\/p>\n<p>&nbsp;<\/p>\n<p>Let&#8217;s look into USB-UART board.<br \/>\nYou can find Micro-USB connector, 4-pin Wire-connector, USB-UART bridge IC CP2104 and 3 LED inticator on top side.<br \/>\nD1 is Tx LED, D2 is Rx LED and D3 is power indicator. Note this board is powered by USB of host PC.<br \/>\nOn bottom side, there are some passive devices and USB signal conditioner of L1.<br \/>\n<img decoding=\"async\" src=\"http:\/\/i49.servimg.com\/u\/f49\/15\/19\/21\/68\/20120721.jpg\" border=\"0\" \/><\/p>\n<p>Place the 4pin wire harness between USB-UART board and your ODROID-X\/X2\/U2\/U3\/C1\/XU3\/XU as below picture.<br \/>\nAnd place the Micro-USB cable between your host PC and USB-UART board.<\/p>\n<p><img decoding=\"async\" src=\"http:\/\/i49.servimg.com\/u\/f49\/15\/19\/21\/68\/20120722.jpg\" border=\"0\" \/><\/p>\n<p>You can download proper device drivers for your host PC.<br \/>\nClick &#8220;Tools&#8221; tab to get drivers for Windows, Mac and Linux in this link.<br \/>\n<a href=\"https:\/\/com.odroid.com\/sigong\/_admin\/blog\/blog.php?category=notice&amp;field=&amp;keyword=&amp;page=7&amp;mode=read&amp;bid=128\" target=\"\">http:\/\/www.silabs.com\/products\/interface\/usbtouart\/Pages\/usb-to-uart-bridge.aspx<\/a><\/p>\n<p>I want to let you know some information of CP2104 device driver for your host Linux PC.<br \/>\nIf your host Linux PC runs Kernel 3.2 or higher, the CP2104 works without any addtional installation\/compilation.<br \/>\nNote Ubuntu 12.04 is based on Kernel 3.2.<\/p>\n<p>This is a USB-UART board for ODROID-Q model which also has CP2104.<br \/>\nWe call it &#8220;Debug board&#8221; from time to time.<br \/>\n<img decoding=\"async\" src=\"http:\/\/i49.servimg.com\/u\/f49\/15\/19\/21\/68\/20120628.jpg\" border=\"0\" \/><\/p>\n","protected":false},"excerpt":{"rendered":"<p>There is a system console port in all of ODROID series to monitor the low-level information of target system. This is very useful and important tool for platform software development. The system console port uses UART(Universal asynchronous receiver\/transmitter) of CPU for communication between your host PC and target board. Protocol is 115200bps \/ no-parity \/ [&#8230;]\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[18463],"tags":[20902,20899,20901,20898],"class_list":["post-11341","post","type-post","status-publish","format-standard","hentry","category-blog","tag-odroid-q","tag-odroid-u2","tag-odroid-x","tag-odroid-x2"],"_links":{"self":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/11341","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/comments?post=11341"}],"version-history":[{"count":1,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/11341\/revisions"}],"predecessor-version":[{"id":11342,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/11341\/revisions\/11342"}],"wp:attachment":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/media?parent=11341"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/categories?post=11341"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/tags?post=11341"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}