{"id":15378,"date":"2019-02-13T16:38:42","date_gmt":"2019-02-13T07:38:42","guid":{"rendered":"https:\/\/www.hardkernel.com\/?p=15378"},"modified":"2019-02-13T16:41:23","modified_gmt":"2019-02-13T07:41:23","slug":"odroid-n2","status":"publish","type":"post","link":"https:\/\/www.hardkernel.com\/ko\/blog-2-ko\/odroid-n2\/","title":{"rendered":"ODROID-N2"},"content":{"rendered":"<p>Forum :\u00a0<a href=\"https:\/\/forum.odroid.com\/viewtopic.php?f=176&amp;t=33781\">https:\/\/forum.odroid.com\/viewtopic.php?f=176&amp;t=33781<\/a><\/p>\n<p><strong class=\"text-strong\">ODROID-N2<\/strong>\u00a0is a new generation single board computer that is more powerful, more stable, and faster performing than N1.<br \/>\nThe main CPU of the N2 is based on big.Little architecture which integrates a quad-core ARM Cortex-A73 CPU cluster and a dual core Cortex-A53 cluster with a new generation Mali-G52 GPU.<br \/>\nThanks to the modern 12nm silicon technology, the A73 cores runs at 1.8Ghz without thermal throttling using the stock metal-housing heatsink allowing a robust and quiet computer.<br \/>\nThe CPU multi-core performance is around 20% faster and the 4GByte DDR4 RAM is 35% faster than the N1. The N2\u2019s DDR4 RAM is running at 1320Mhz while N1\u2019s DDR3 was running at 800Mhz.<br \/>\nThe large metal housing heatsink is designed to optimize the CPU and RAM heat dissipation and minimize throttling. The CPU is placed on the bottom side of the PCB to establish great thermal characteristics.<\/p>\n<p><strong class=\"text-strong\">Board Detail<\/strong><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-2.jpg\" width=\"1280\" height=\"781\" \/><br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/table-1.png\" width=\"1280\" height=\"286\" \/><\/p>\n<p><strong class=\"text-strong\">N2 block diagram<\/strong><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-3.png\" width=\"1220\" height=\"686\" \/><\/p>\n<p><strong class=\"text-strong\">CPU performance<\/strong><br \/>\nDhrystone-2, Double-Precision Whetstone, Sysbench and Memory bandwidth benchmark results show the N2 system performance comes out ahead of other popular ARM SBCs.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-4.png\" width=\"1280\" height=\"629\" \/><\/p>\n<p><strong class=\"text-strong\">GPU performance<\/strong><br \/>\nThe Mali-G52 runs at 846Mhz and is ~10% faster than Mali-T860MP4 in ODROID-N1.<br \/>\nThe Mali-G52 is the second Bifrost-based mainstream GPU from Arm.<br \/>\nThere are two Shader Processors in the GPU and each core has three Execution Engines. This is sometimes referred to as MP6.<br \/>\nGPU performance was measured with glmark2-es2 \u201c&#8211;off-screen\u201d option.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-5.png\" width=\"1280\" height=\"667\" \/><\/p>\n<p><strong class=\"text-strong\">RAM performance<\/strong><br \/>\nWhy does DDR4 matter? 1320Mhz-DDR4 is 35% faster than 800Mhz-DDR3.<br \/>\nODROID-N2 DDR4 RAM runs at 1320Mhz.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-6.png\" width=\"1280\" height=\"643\" \/><\/p>\n<p><strong class=\"text-strong\">CPU frequency vs performance<\/strong><br \/>\nSome ODROID users may recall the lower than expected clock speed in S905.<br \/>\nWe ran a test to double check the ratio between CPU clock frequency and performance.<br \/>\n<em class=\"text-italics\">cmd : sysbench cpu &#8211;max-cpu-prime=100000 &#8211;time=10 &#8211;threads=6 run<\/em><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-8.png\" width=\"1280\" height=\"682\" \/><\/p>\n<p><strong class=\"text-strong\">Thermal characteristics\u00a0<\/strong><br \/>\nTo check the thermal throttling, we ran some heavy CPU and GPU loads together on the SoC and monitored temperature. We ran the test within a chamber that keeps the ambient temperature at 35\u00b0C.<br \/>\n<em class=\"text-italics\">cmd : stress-ng &#8211;cpu 6 &#8211;cpu-method matrixprod &amp;&amp; glmark2-es2-fbdev &#8211;off-screen &#8211;run-forever<\/em><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-9.png\" width=\"1280\" height=\"645\" \/><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-10.png\" width=\"1280\" height=\"595\" \/><\/p>\n<p><strong class=\"text-strong\">Gbit Ethernet<\/strong><br \/>\nAccording to our iperf test result, the throughput performance was near 1Gbps.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-11.png\" width=\"1280\" height=\"681\" \/><\/p>\n<p><strong class=\"text-strong\">USB 3.0 hosts<\/strong><br \/>\nWe measured the USB transfer speed with a UAS capable SSD.<br \/>\nThe average ~340MB\/s of throughput should be acceptable for many application.<br \/>\nSince four USB host ports share a single root hub, the transfer rate must be lower if you use multiple USB devices at the same time.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-12.png\" width=\"1280\" height=\"680\" \/><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-13.png\" width=\"1280\" height=\"683\" \/><\/p>\n<p><strong class=\"text-strong\">eMMC storage performance<\/strong><br \/>\nSequential read and write speed is over 150MB\/s and 125MB\/s respectively.<br \/>\n4K random access performance is reasonably fast too. iozone test result are as follows.<br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/table-2.png\" width=\"1280\" height=\"148\" \/><\/p>\n<p><strong class=\"text-strong\">Micro-SD UHS performance<\/strong><br \/>\nUsing properly implemented UHS dynamic voltage scaling, the sequential read and write speed is over 70MB\/s and 55MB\/s respectively.<br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/table-3.png\" width=\"1280\" height=\"145\" \/><br \/>\nThe previous S905 SoC couldn\u2019t activate the UHS mode once the system boots from eMMC. But S922X can keep using the UHS mode with the eMMC module simultaneously.<\/p>\n<p><strong class=\"text-strong\">Sound DAC<\/strong><br \/>\nODROID-N2 has an on-board high quality 384Khz\/32bit stereo audio line output.<br \/>\nDynamic range and SNR is near 100dB and Total-Harmonic-Distortion is lower than 0.006%. You can enjoy Hi-Fi sound quality without an external expensive audio DAC.<\/p>\n<p><em class=\"text-italics\">Signal to Noise Ratio : 1KHz (384KHz, 32bit, 2-ch)<br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-14.jpg\" width=\"800\" height=\"600\" \/><\/em><\/p>\n<p><em class=\"text-italics\">THD + N Ratio : 1KHz (384KHz, 32bit, 2-ch)<br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-15.jpg\" width=\"800\" height=\"600\" \/><\/em><\/p>\n<p><em class=\"text-italics\">Frequency Response : 20Hz &#8211; 20KHz(384KHz, 32bit, 2-ch)<br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-16.jpg\" width=\"800\" height=\"600\" \/><\/em><\/p>\n<p><strong class=\"text-strong\">SPI Flash memory boot<\/strong><br \/>\nODROID-N2 can boot from on-board SPI memory instead of uSD memory or eMMC cards.<br \/>\nThe on-board SPI memory is 8MB in size and can include the bootstrap binaries, U-boot, bare minimum Linux kernel, and a ramdisk that includes \u201cPetitboot\u201d. The \u201cPetitboot\u201d software provides a user friendly interface and allows users to select a boot media.<br \/>\nUnfortunately, since the SPI bus on S922X shares the hardware interface with eMMC, the SPI flash memory on ODROID-N2 is only accessible at boot until the eMMC hardware block is activated. So you have to remove eMMC module and boot from a SD card to update firmware in the SPI flash easily.<\/p>\n<p><strong class=\"text-strong\">RTC<\/strong><br \/>\nODROID-N2 has an on-board RTC component, NXP PCF8563, interfaced to the I2C bus and can use a backup battery as an alternative power source while the main power source is absent. Since the actually measured power consumption is less than 1uA, the RTC can run for over 10 years with a CR2032 backup battery. Also, this will let your ODROID-N2 wake up at a certain time once you set an alarm time and shutdown it.<\/p>\n<p><strong class=\"text-strong\">Crypto Engine<\/strong><br \/>\nThe ARMv8 architecture supports hardware accelerated crypto extensions for building a secure system. As expected, we could see very decent openSSL performance with ODROID-N2.<br \/>\n<em class=\"text-italics\">cmd: openssl speed sha256 (8KByte)<\/em><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-7.png\" width=\"756\" height=\"425\" \/><\/p>\n<p><strong class=\"text-strong\">GPIO (40Pin header)<br \/>\n<img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-17.png\" width=\"463\" height=\"512\" \/><\/strong><\/p>\n<p>The N2 GPIO interface is similar to C2 and fully supports a 3.3Volt interface while N1 could only support 2.8Volt IO. This is beneficial for using various peripherals without complicated level shifters.<br \/>\nAnother big improvement is a faster SPI bus interface. Its maximum frequency is over 150Mhz, and we will try to implement a DMA driven SPI driver for faster LCD display.<\/p>\n<p><strong class=\"text-strong\">Power consumption<\/strong><br \/>\nIdle state: 1.6~1.8 Watt<br \/>\nHeavy load state: 5.2~5.3 Watt (<em class=\"text-italics\">stress-ng &#8211;cpu 6 &#8211;cpu-method matrixprod<\/em>)<br \/>\nNo cables are attached except DC power input and USB-UART debug console cable.<\/p>\n<p><strong class=\"text-strong\">Software support<\/strong><\/p>\n<p><strong class=\"text-strong\">Linux<\/strong><br \/>\nAn Ubuntu 18.04 LTS image is available with Kernel version 4.9.152 LTS at this moment. This kernel version will be officially supported until Jan, 2023.<br \/>\nA hardware accelerated video decoder (VPU) driver is ready. We have c2player and kplayer examples which can play 4K\/UHD H.265 60fps videos smoothly on the framebuffer of ODROID-N2 HDMI output.<br \/>\nThe Mali G52 GPU Linux driver works only on the framebuffer. We tested the latest PPSSPP emulation and it can handle x3 scaling on a 4K display nicely with well implemented VSYNC.<br \/>\nThere will be a Linux Wayland driver a few months later. We are intensively working on it together with Arm and Amlogic.<br \/>\nUnfortunately, there is no X11 GPU driver since Arm has no plan to support X11 for Bifrost GPUs anymore.<br \/>\nWe hope that the Panfrost open source driver can be ported to ODROID-N2 soon.<\/p>\n<p><strong class=\"text-strong\">Android<\/strong><br \/>\nAndroid 9 Pie is ready, and we will release a full source code BSP and pre-built image together.<br \/>\nAt this moment, Android user land supports only a 32bit system while the Kernel runs in 64bit mode.<br \/>\nWe will eventually try to support a 64bit Android system with Vulkan capable GPU driver in a few months.<\/p>\n<p><strong class=\"text-strong\">Availability and price<\/strong><br \/>\nWe will start to sell from very late March and the first shipment will start early April. There is no plan to accept any pre-order.<br \/>\n2GB model: $63<br \/>\n4GB model: $79<\/p>\n<p><strong class=\"text-strong\">Debugging Party<\/strong><br \/>\nWe will send some engineering samples to our friendly community members very soon.<br \/>\nI hope we can ship the samples in this week.<\/p>\n<p>WiKi pages:\u00a0<a class=\"postlink\" href=\"https:\/\/wiki.odroid.com\/odroid-n2\/odroid-n2\">https:\/\/wiki.odroid.com\/odroid-n2\/odroid-n2<\/a><br \/>\nGithub Kernel:\u00a0<a class=\"postlink\" href=\"https:\/\/github.com\/hardkernel\/linux\/tree\/odroidn2-4.9.y\">https:\/\/github.com\/hardkernel\/linux\/tree\/odroidn2-4.9.y<\/a><br \/>\nGithub u-boot:\u00a0<a class=\"postlink\" href=\"https:\/\/github.com\/hardkernel\/u-boot\/tree\/odroidn2-v2015.01\">https:\/\/github.com\/hardkernel\/u-boot\/tr &#8230; 2-v2015.01<\/a><\/p>\n<p><strong class=\"text-strong\">Specification<\/strong><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/table-4.png\" width=\"1280\" height=\"1328\" \/><\/p>\n<p>You can choose between two colors: semi-transparent dark black and clear white.<br \/>\nThe price will be only $4.\u00a0<img loading=\"lazy\" decoding=\"async\" class=\"smilies\" title=\":-D\" src=\"https:\/\/forum.odroid.com\/images\/smilies\/icon_e_biggrin.gif\" alt=\":D\" width=\"15\" height=\"17\" \/><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-18.jpg\" width=\"1280\" height=\"385\" \/><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-20.jpg\" width=\"1280\" height=\"395\" \/><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-22.jpg\" width=\"1280\" height=\"546\" \/><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-23.jpg\" width=\"1000\" height=\"316\" \/><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-24.jpg\" width=\"1000\" height=\"536\" \/><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full\" src=\"https:\/\/dn.odroid.com\/S922X\/ODROID-N2\/Pictures\/figure-25.jpg\" width=\"1000\" height=\"514\" \/><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Forum :\u00a0https:\/\/forum.odroid.com\/viewtopic.php?f=176&amp;t=33781 ODROID-N2\u00a0is a new generation single board computer that is more powerful, more stable, and faster performing than N1. The main CPU of the N2 is based on big.Little architecture which integrates a quad-core ARM Cortex-A73 CPU cluster and a dual core Cortex-A53 cluster with a new generation Mali-G52 GPU. Thanks to the modern [&#8230;]\n","protected":false},"author":21,"featured_media":15379,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[20906],"tags":[20914],"class_list":["post-15378","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog-2-ko","tag-odroid-n2"],"_links":{"self":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/15378","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/users\/21"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/comments?post=15378"}],"version-history":[{"count":2,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/15378\/revisions"}],"predecessor-version":[{"id":15383,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/posts\/15378\/revisions\/15383"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/media\/15379"}],"wp:attachment":[{"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/media?parent=15378"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/categories?post=15378"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hardkernel.com\/ko\/wp-json\/wp\/v2\/tags?post=15378"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}