This “Case Type 7” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages can be blow out through the 92mm cooling fan holes on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan at the hole if the decent power for the fan is supplied.
- Supported storages:
- On-board eMMC 5.1 module
- On-board M.2 NVMe (NGFF-2280)
- Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)
- SATA Data & Power cables must be purchased
- This case is compatible with the H2 Net Card, which is not included in the package.
- The disk drive mounting screws (M3x6mm) are included in the package.
- The power and reset switches are accessible through the hole at the front
- Optional LED Power Button (diameter: 16mm) can be installed at the front
- Size : 128 (L) x 157 (W) x 111 (H) mm
- A. Bottom panel
- B. Front panel
- C. 2.5″ SATA HDD/SSD bracket
- D. 2.5″ SATA HDD/SSD bracket
- E. Left Panel
- F. Right panel
- G. Top panel
- H. Inner bracket
- I. Rear panel
- J. 16 x 6mm M3 Truss Head Bolts
- K. 4 x M5 Nuts
- L. 4 x M5 Truss Head Bolts
- M. 2 x 16x9mm (M) Steel PCB Supports
- N. 4 x 40mm (F) PCB Supports
- O. 4 x 20mm (M) PCB Supports
- P. 4 x 40mm (M) PCB Supports
- Q. 4 x Rubber Feet (Round / Clear)
- R. 1 x 92mm Stainless Cooling Fan Grill
*Please mind that photo includes spare parts image for some supports and screws. Standard part quantity for this product is same as Package contents description above.