세일!

(DISCONTINUED)3.5inch LCD Shield Case SmokyBlue

Name: (DISCONTINUED)3.5inch LCD Shield Case SmokyBlue
SKU: G147511611245
Price: 300 KRW
Availability: OutOfStock

₩300

OBSOLETED

This product is no longer available.

품절

SKU: G147511611245 카테고리: Obsolete Products

Laser acrylic enclosure for the 3.5inch LCD Shield.

– Dimension : 126 x 68 x 35 mm(assembled)
– Weight : 56g approx.
– Color : Smoky Blue, Smoky White and Clear
– Compatible with C1/C1+/C2

Package include

A.B.C.D.E.F. Acrylic pieces
G. 3 x 5 mm male-female hex PCB spacers (metal)
H. 1 x 5 mm female hex spacer (metal)
I. 4 x 5 mm screws

Assembly Guide

	Step 1 Peel the protective backing off both sides of all the laser-cut pieces.
	Step 2 Add the spacers(G) with screws(I) on the piece (D).
	Step 3 Add the spacer(H) with screw(I) on the piece (D). Check the right point again.
	Step 4 Alight the above part with ODROID-C2 or ODROID-C1+ which is 3.5inch Touchscreen Shield mounted.
	Step 5 Assemble the piece(E).
	Step 6 Assemble the piece(A).
	Step 7 Assemble the piece(C).
	Step 8 Please take more special care for the process from here. You might damage the acrylic piece. Hang the top side of the piece(F) first. The round curve is the bottom side.
	Step 9 Assemble the bottom side of the piece(F) gently. Please check the disassemble guide below.
	Step 10 Hang the top side of the pice(B) first. The round curve is the bottom side.
	Step 11 Assemble the bottom side of the piece(B) gently. Please check the disassemble guide below.
	The eMMC connector and MicroSD Card slot is open.
	Tip! Disassemble Guide 1 Hold the locking part as picture beside.
	Disassemble Guide 2 Lift the bottom part from the locking just for 1-2mm Caution!! If you lift it up more, it might damage the locking part.
	Disassemble Guide 3 Release it from the locking.