ODROID-GO Advance Black Edition Aura Black

PACKAGE INCLUDE

A	USB Type-C Power Cable	J	D-PAD rubber
B	Top enclosure	K	A, B, X, Y button rubber
C	Bottom enclosure	L	battery sticker
D	Plastic L/R/L2/R2 trigger, X, Y, power Buttons	M	Analog joystick
E	Plastic D-pad, A, B Buttons	N	320×480 TFT LCD
F	ODROID-GO-Advance board	O	0.5W speaker
G	3000mAh battery	P	1.7×5 screws (7 pcs)
H	LCD window	Q	1.7×8 screws (4 pcs)
I	I ~ VI button rubber	R	Driver

 

* 8GB or higher capacity MicroSD card is additionally required. 

You can download the OS image and then, you will write the image to your SD card. There are some ways to write the OS image. For beginners, we recommend the use of an Etcher tool.

Installing OS image on your SD card

 

ASSEMBLY GUIDE

https://wiki.odroid.com/odroid_go_advance/go_adv_assembling

• Force Power OFF

DISSASSEMBLY GUIDE

THE EMULATOR SUPPORTS

atari2600
atari5200
atari7800
atarilynx
gamegear
gb
gba
gbc
mastersystem
megadrive
nes
pcengine
pcenginecd
psx
segacd
snes
psp

And more

• Some game ROMs cannot run at full speed.

SPECIFICATIONS

Processor	CPU : RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz) GPU : Mali-G31 Dvalin
Memory	1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage	SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display	3.5inch 320×480 TFT LCD (ILI9488, MIPI interface)
Audio	Earphone Jack, 0.5Watt 8Ω Mono
Battery	Li-Polymer 3.7V/3000mAh, Up to 9 hours of continuous game playing time
DC Jack	5V input, USB-C power connector: A USB-C charging cable is included in the package.
External I/O	USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons	F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog joystick
Wireless	Built-in 2.4Ghz 802.11b/g/n (ESP-WROOM-S2)
Power consumption	Game emulation: 300 ~ 550mA (depends on backlit brightness and type of game emulations and the wireless usage) Power off mode: <1mA If you turn off the WiFi, the power consumption will be same as the previous Revision 1.0.
Charging time	2.5~3 hours when the device turns off. When you play game, it takes 4~5 hours.
Dimensions	155x72x20 mm (6.1×2.8×0.8 inch), Weight: 180 g (6 oz)

 

DIAGRAM

 

 

BOARD DETAIL