ODROID-H4 Case Type 4

Space for Net Card and 4 x 3.5” SATA drives.
The hole for the Net Card is user-configurable: use a cutter to separate it from the rear panel.
This case is not compatible with the H2/H3 series.

• Net card is not included in this product.
• We recommend that you use two SATA Data and Power Cable (200mm) and two SATA Data and Power Cable (250mm) for connecting four HDDs.

• Top panel
• Rear panel
• Front panel
• Bottom panel
• Left/Right Panel
• Side lock piece
• 2 x 10mm (M/F) PCB Supports
• 2 x 40mm (F/F) PCB Supports
• 2 x 40mm (M/F) PCB Supports
• 6 x 6mm Truss Head Bolts
• 4 x 10mm Fan Screws
• 16 x 6mm #6-32 Round Head Screws
• 92x92x25mm DC Cooling Fan

How to assemble the I2C 20×4 LCD Module into the ODROID-H4 CaseType 4

Link : https://wiki.odroid.com/odroid-h4/application_note/i2c_20x4_lcd