ODROID-GO Super Dim Gray

ODROID-GO Super hardware design is upgraded version of the OGA . The LCD size changed to 5 inches with a tempered cover glass and, resolution changed  to 854×480 pixels. New OGS has a 4000mAh battery. You can continuously play games for several hours depending on back light brightness.

The OGS is pre-assembled in our factory instead of being a DIY assembled kit. Since there is no built-in slow wireless connectivity, support for a faster USB WIFI+BT was improved. Now the micro-SD card slot is push-push type (spring eject).

There are minor changes as of 29th of July, 2021. The size of analog joysticks are bigger and the color of black buttons are changed to gray.

 

 

 

Specifications

 

Processor	CPU : RockChip RK3326(Quad-Core ARM 64bit Cortex-A35 1.3GHz) GPU : Mali-G31 MP2
OS	Ubuntu 18.04. 19.10 and 20.04 on Kernel 4.4 Aarch64 Modified EmulationStation front-end with Libretro. GPU accelerated OpenGL-ES on DRM-FB
Memory	1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage	SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display	5inch 854×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface)
Audio	Earphone stereo jack, 0.5Watt 8Ω Mono speaker
Battery	Li-Polymer 3.7V/4000mAh(76.5×54.5×7.5mm(L*W*T)), Up to 10 hours of continuous game playing time
DC Jack	5V input, USB-C power connector : A USB -C charging cable is included in the package. Maximum drawing current: 1.5Amp
External I/O	USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons	F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog joystick, Analog joystick2
Wireless	Optional USB WiFi adapter
Power consumption	Game emulation: 350 ~ 600mA (depends on backlit brightness and type of game emulations and the wireless usage), Power off mode: <1mA
Charging time	3.4 ~ 4 hours when the device turns off. When you play game, it takes 4.5 ~ 5.5 hours.
Dimensions	204x86x25 mm, Weight: 280 g (10 oz)

 

 

• How to use ODROID-GO-SUPER : WIKI

– 8GB or higher capacity MicroSD card is additionally required.

Installing OS image on your SD card

– Force Power OFF

 

Block Diagram

 

 

 

Header(P2) Description

 

 

 

* Current version (Button details have been changed from July 29th, 2021 / Re-produced from September 21st, 2022)

* Previous version (Button details have been changed from end of September, 2022)

* This product has shipping restrictions, cannot be delivered to Russia