Description:

This “Case Type 6” is designed for the user who needs high performance network with a minimal or regular range storages. Basically, this is the fanless design and the heated air from a processor can be blow out through the 92mm cooling fan hole on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.

• Supported storages:
  • On-board eMMC 5.1 module
  • On-board M.2 NVMe (NGFF-2280)
• This case is compatible with the H2 Net Card, which is not included in the package.
• Any SATA storage device can’t be installed in the Type 6 cases.
• The disk drive mounting screws (M3x6mm) are included in the package.
• The power and reset switches are accessible through the hole at the front
• Optional LED Power Button (diameter: 16mm) can be installed at the front
• Size : 128 (L) x 132 (W) x 68 (H) mm

 

Package contents:

• A. Top panel
• B. Bottom panel
• C. Front panel
• D. Left panel
• E. Right panel
• F. Back panel
• G. 1 x 92mm Stainless Cooling Fan Grill
• H. 8 x 6mm M3 Truss Head Bolts
• I. 4 x M5 Nuts
• J. 4 x M5 Truss Head Bolts
• K. 4 x 20mm (M) PCB Supports
• L. 2 x 16x9mm (M) Steel PCB Supports
• M. 4 x 40mm (F) PCB Supports
• N. 4 x Rubber Feet (Round / Clear)

 

*Please mind that photo includes spare parts image for some supports and screws. Standard part quantity for this product is same as Package contents description above.

 

 

 

Optional accessory

• I2C 20×4 LCD Module
• LED Power Button
• 16Port I2C GPIO Board
• H2 Net Card

 

Mechanical drawings

• https://dn.odroid.com/temp/box/ODROID-H2_TYPE6.dxf